Light Fitting Replacement in Burnley

Light fitting replacement in Burnley for ceiling lights, pendants, wall lights and chandeliers. What looks like a five minute job often turns up loop in wiring or an old ceiling rose. We change it properly and test afterwards.

What Is Behind a Ceiling Rose

Open an old ceiling rose and you often find three or four cables, not one. That is loop in wiring, where the circuit passes through each light on its way round. Connect the wrong pair and either nothing works or the switch controls the wrong light. It has to be identified first.

More Information

Heavy Fittings and Ceiling Fixings

A chandelier or large pendant weighs far more than a plastic rose was ever designed to hold. It needs fixing to a joist or a properly fitted brace, not just plasterboard. We check what is above the ceiling before hanging anything heavy from it.

Old Wiring Found During a Swap

Changing a fitting sometimes turns up rubber cable, no earth at the switch, or connections that have been running warm. Older lighting circuits often have no earth wire, which modern metal fittings need. We tell you what we found rather than covering it back up.

About us

Light fitting replacement is one of the smaller jobs JD Electrical Services does around Burnley, and it is often how people first use us. We have been trading for 10 years. The fitting is changed, the connections checked and the circuit tested before we leave, however small the job.

  • Approved electricians with 10 years behind us

  • Open 6am to 11pm, seven days a week

  • Emergency call outs available 24 hours a day

  • Price agreed in writing before work starts

  • Certificate issued at the end of every job

Frequently Asked Questions

Can you fit a light I have bought myself?

Yes, that is what we usually do. Have the fitting and its instructions on site, and check it either comes with the right bulbs or has them built in. If it turns out to be faulty or unsuitable for the ceiling, we will tell you before fitting it.

My new light fitting has no earth wire, is that a problem?

It depends on the fitting. A double insulated one does not need an earth. A metal fitting does, and many older lighting circuits have no earth at the ceiling. In that case an earth needs running to it, which we can quote for after checking the circuit.

How long does it take to change a light fitting?

A straightforward swap takes around half an hour. Heavy fittings, ones needing a new fixing to the joist, or a rose with loop in wiring to sort out take longer. If we are changing several around the house it is quicker to do them all in one visit.

Our reviews