Electric Vehicle Charging Station Contractor in Burnley

As an electric vehicle charging station contractor in Burnley, we fit home and workplace chargers from start to finish. We check the supply, fit the unit, test it and show you how it works. Open 6am to 11pm seven days a week.

Home > Electric vehicle charging station contractor

Our Services

A home charger fills the car overnight on your own electricity, which costs far less than a public rapid charger. We check the supply, pick a spot near where you park and run the cable out of sight where we can. The home EV charger installation page covers what is involved.

Electric car charger installation takes most of a morning in a typical house. The work covers a supply check, mounting the unit, running a dedicated circuit back to the board and testing it. We fit the protection the regulations call for. Full details are on the electric car charger installation page.

Businesses in Burnley are adding chargers for staff, vans and customer parking. Commercial work starts with a look at the incoming supply, because several units running at once pull a lot of current. We handle the design and the fitting. See the commercial EV charger installation page.

If your charger has stopped, it is often the unit itself, the breaker feeding it or a loose connection. We test the circuit and the charger, then repair or replace whichever part has failed. We work on most makes. The EV charger repair page explains how we work through it.

A smart charger connects to your home wifi and lets you set charging times from an app. That matters on a cheap overnight tariff, because the car charges while the rate is low. All new home chargers have to be smart. There is more on the smart EV charger installation page.

Workplace charging points give staff and visitors somewhere to plug in during the day. Most sites want several units, load management so the supply is not overloaded, and a record of usage. We fit and test the lot. See the workplace charging point installation page.

Our process

Step 1

Free consultation

We discuss your needs and recommend the best solution for you.

Step 2

We sort it for you

We handle everything from start to finish so you do not have to worry.

Step 3

Inspection

We check everything is completed properly and you are fully satisfied.

Frequently Asked Questions

How long does it take to fit an EV charger in Burnley?

Most home installations take three to four hours. That covers checking the supply, mounting the unit, running a new circuit from the consumer unit and testing it. A long cable run or a board that needs replacing first will add time. We tell you either way before booking the job.

Can I charge an electric car from a normal socket?

You can, but it is slow and not meant for daily use. A three pin socket adds only a few miles of range an hour, and the socket runs warm over a long charge. A proper wall charger is around three times faster and sits on its own protected circuit.

Do I need off street parking for a home charger?

Yes. A home charger has to be fitted where the cable does not cross a public footpath, so you need a driveway, garage or private parking space. If you park on the street, workplace or public charging is the usual answer. We can talk it through when we visit.

About us

We started fitting EV chargers as more drivers around Burnley switched to electric, and it is now a large part of what we do. Every charger goes on its own circuit with the correct protection, then gets tested and certificated like any other electrical work. We fit home, workplace and commercial units across Lancashire.

  • Approved electricians with 10 years behind us

  • Open 6am to 11pm, seven days a week

  • Emergency call outs available 24 hours a day

  • Price agreed in writing before work starts

  • Certificate issued at the end of every job

Our reviews